Oem Radio

[magnetic]

Have a 2008 Vectra ,

the aux cable fall i the cigarette connector and after then have the Radio not work,
Did some here now ho power connectors have power on the connetors , i have find one its have power , then its a red colored wire, its not power from the ignition switch , have check all the fuses , all its fine

 

[transporter]

Hallo
Number One is Okay ?

 

[magnetic]

Its functions of Radio/cd from the steering wheel, but not the Aux cant not been activate from this controls, im try too replement the Radio/ cd Tommorw and look the, i give feed of it

 

[magnetic]

Jeg bytter ut radio/cd, men skjermen er i sikker modus, er noe en kan løse selv eller må avansert utstyr til ,

 

[magnetic]

have replaced the radio,/cd but the display goes into safety mode, is there something someone can do themselves and change or do I need a PC and software to solve it

 

[transporter]

La oss se hva oversetteren gjør om det nå:
Hvis radioen er fra Vectra C og produksjonsåret må du "gifte deg", trenger du Opel eller riktig programvare for det.
Det kan du bare gjøre hvis radioen har vært «ugift» på forhånd.

Ablauf Entheiraten und Verheiraten des Radios

 

[magnetic]

The unit its removed from a Vectra c from 05-08 the facelift type , im removed the Bumper, and another elektrick parts from this car, and must have the Radio code too, Hope i there are in this car,thats i not now before the Monday

 

[transporter]

But then you must be unmarried but probably the radio of the donor vehicle beforehand.
Before it is expanded.
Connect Tech2 /OPCOM, select device, deactivate "Theft protection" or alternatively "Reset device".

 

[magnetic]

Have conected Opel dealer in Norway. And the say i must have the Radio code fore the radio and that radio i Bay on a used cars shop did, not have this code when the cars been to old its there its hopeless to get this code, i do take out the oem radio and i have bay a kit with cables and radio cover fore use 1 din Radio , i Rally have and i not have a laptop fore using the program of Tech2/ opcm , to much money to use fore one time using ,

Thanks fore the help enyway.

 

[magnetic]

Hi agin
Have new information about this theme , i get a special feeling and try too replement the frontpanel of nobs , on/off /volume switch and the radio /cd from my older radio/cd have been normaly without asking if display safe , so i feel shore the safety part ,teft system its in the frontpanel part

There its apps too download to find the code of cd/radio when you have the serial number of the unit ,of blapunkt its this number on the box ,the serial number starting with bo on the box

 

[transporter]

So I'm curious if this will lead to success

 

[magnetic]

Fore me and that way i do it with replement the front part of the radio/ cd have the been a succes, maybe i have a good luckey ,i dont now
I write about it , maybe other users want this information then..

 

[transporter]

If it works, that's great